Aller au contenu
Fini la pub... bienvenue à la cagnotte ! ×
AIR-DEFENSE.NET

USMC


scalp79

Messages recommandés

  • 2 weeks later...

Quand les marines apprécient le professionnalisme et le côté relaxe de nos bigors , les artilleurs de Marine !

 

http://www.24thmeu.marines.mil/News/Article-Display-Page/Article/511162/us-marines-employ-new-mortar-system-with-french-in-djibouti/

 

Citation

DJIBOUTI --

Marines and Sailors with India Battery, the artillery attachment for Battalion Landing Team 1st Battalion, 2nd Marine Regiment, 24th Marine Expeditionary Unit, conducted bilateral training with French Marines in Djibouti Aug. 25-27 to integrate and strengthen an allied-nation partnership.

The India Battery Marines used the opportunity to discuss tactics and procedures for the newest addition to the Marine Corps artillery arsenal, the M-327 120 mm Expeditionary Fire Support System, or EFSS, a mortar system with French origins.

Despite the many similarities between the U.S. and French systems, there were comparable differences when it came to certain tactics and overall demeanor between the two services, said Staff Sgt. Adrian J. Rondini, 28, platoon sergeant and Cleveland, Ohio, native.

One of the tactics the French employed in Dibouti was what artillerymen call “direct lay,” explained 1st Lt. Alexander Kowaleuski, India Battery’s Guns Platoon commander. It’s a method in which the unit observes, fires and adjusts each round from the mortar position, instead of having forward observers ahead of the gunline as the “eyes” of the weapons.

“It’s a tactic that we can employ also, and we actually do it exactly the same way,” said Kowaleuski.  

Another difference between the two was simply the demeanor of the French Marines as they ran their gunline.

The intensity and fired-up attitudes U.S. Marines are known for was contrasted by the calmer, even quieter French Marines.

The French Marines’ lifestyle is different; everything from the food they eat to their gun-line procedures, said Sgt. Ralph T. Pfeil, 27, an artillery section chief for India Battery.

“They did everything they were supposed to do in a timely manner… it was professional and relaxed,” said Pfeil, 27, from Mount Pleasant, N.C.

Discussing different tactics for employing mortars comprised the majority of the training exercise, but it was the little things that helped forge friendships as they marveled at each other’s everyday items.

“It was nice seeing them interested in something so small, like when they were taking pictures inside the Humvee. To us, it’s just a Humvee, we see it every day. But to them it was something new and different,” said Rondini.

The daily rations, known as Meals-Ready-To-Eat, quickly became a staple of conversation as everybody gathered together to share and trade goods gathered from the meals.

“We were all like little kids, everyone wanted to see what each other had in their MREs,” said Pfeil.

These small moments helped both sides connect quickly and easily.

“Something so small to us was amazing to them,” said Rondini. “It definitely helped foreign relations working with the French military. If we work together again, we’ll know how to work together.”

The training enabled the Marines to learn quite a lot during their short time spent ashore with their French counterparts. Swapping MREs and gun stories laid a foundation for friendship and future training opportunities.

A contingent of the 24th MEU has been in Djibouti for over a month, taking advantage of unilateral, bilateral and joint training opportunities. So far, 24th MEU Marines have teamed with French light armored reconnaissance Marines, conducted desert survival courses with the French, and have teamed with U.S. Air Force personnel to conduct various training events.

The 24th MEU is deployed with the Iwo Jima ARG as a theater reserve force for U.S. Central Command and is providing support for maritime security operations and theater security cooperation efforts in the U.S. Navy's 5th Fleet area of responsibility. They are currently in the six month of a regularly scheduled deployment.

 

  • Upvote (+1) 1
Lien vers le commentaire
Partager sur d’autres sites

  • 2 weeks later...
il y a 15 minutes, ascromis a dit :

Entraînement à la mise en œuvre de canots pneumatiques à bord de l'USS Bonhomme Richard (LHD-6):

-Je serais curieux de savoir combien de temps ils mettent à gonfler un canot grâce à un gonfleur à pied !!

Une personne seule, pour un Zod MK II (4,20) avec la pompe à pied + installation du plancher et du moteur, met 15 mn. A plusieurs ça va plus vite. Avec plancher gonflable faut pomper davantage :laugh: certains zod militaires à plancher gonflable ont des bouteilles d'air pour un gonflage auto. 

Lien vers le commentaire
Partager sur d’autres sites

Il y a 2 heures, Fusilier a dit :

certains zod militaires à plancher gonflable ont des bouteilles d'air pour un gonflage auto.

Je m'en doutais fortement, mais, à mon avis, dans le cas de la vidéo, le Gunny/Staff/1st/Sergeant à décidé que:

-Ouais mais là, on a pas bouteilles d'air comprimé, donc vous utilisez le gonfleur à pied, vous savez, celui que vous utilisez à la plage pour gonfler la bouée canard de votre neveu !!!

-Oh, Fuc***g shit !!!!

Lien vers le commentaire
Partager sur d’autres sites

il y a 17 minutes, ascromis a dit :

Je m'en doutais fortement, mais, à mon avis, dans le cas de la vidéo, le Gunny/Staff/1st/Sergeant à décidé que:

-Ouais mais là, on a pas bouteilles d'air comprimé, donc vous utilisez le gonfleur à pied, vous savez, celui que vous utilisez à la plage pour gonfler la bouée canard de votre neveu !!!

-Oh, Fuc***g shit !!!!

En principe, les bouteilles air ce n'est pas sur les Zod à plancher alu comme dans la video. Les bouteilles c'est sur des engins dits à déploiement rapide, genre parachutage en mer ou largage à partir d'un ETRACO.  

Tu peux faire avec de l'air comprimé, mais faut finir à la pompe à pied (il y a des manomètres sur les boudins qu'il faut surveiller)  Mais, vraiment avec la pompe Zodiac c'est assez rapide 

Sur la video c'est presque du temps réel; le chiant à faire c'est l'installation du plancher et ne pas pincer les boudins avec, mettre à poste le moteur et tout ça, à plusieurs comme là, ça va vite. 

Modifié par Fusilier
  • Upvote (+1) 1
Lien vers le commentaire
Partager sur d’autres sites

il y a 3 minutes, Fusilier a dit :

Sur la video c'est presque du temps réel; le chiant à faire c'est l'installation du plancher et ne pas pincer les boudins avec, mettre à poste le moteur et tout ça, à plusieurs comme là, ça va vite.

Ça à l'air en effet, il leur reste juste à travailler, au retour, le lancer de pomme de touline !! :laugh:

Lien vers le commentaire
Partager sur d’autres sites

  • 1 month later...
il y a 34 minutes, Ciders a dit :

Peut-être qu'il y a des besoins plus urgents ailleurs. Six MV-22 et trois ravitailleurs, ça peut être utile pour pas mal d'opérations.

Possible. Mais l'US Marines doit avoir dans les 200 MV 22 , sont pas à 6 près et les C130 ça doit être pareil, surtout qu'ils peuvent en plus utiliser ceux de la Navy 

Lien vers le commentaire
Partager sur d’autres sites

Pour ce que ça vaut, voici la source d'origine:

http://www.potomacinstitute.org/cai-work/2276-cai-hosted-the-special-purpose-marine-air-ground-task-force-crisis-response-africa-spmagtf-cr-af-rotation-16-1

Citation

The MAGTF is working with half the Osprey’s they were last year in order to boost stateside readiness, going from 12 down to 6. Col Wetterauer assured that their mission only calls for 6, assuming 2 are down, 2 are conducting missions, and 2 are the back up to conduct logistics, maintenance and training. Col Wetterauer said that aviation readiness is their “number 1 concern.” This echoes the voice of the last RCSS speaker, Col Anthony M. Henderson, commander of the 26th Marine Expeditionary Unit, who reinforced the primacy of Marine Aviation readiness saying that “we have to keep the flight hours going as much as possible, that saves lives.”

 

  • Upvote (+1) 2
Lien vers le commentaire
Partager sur d’autres sites

  • 2 weeks later...

 

http://www.militarytimes.com/articles/marines-approve-magpuls-signature-polymer-ammunition-magazine

 

 

 

Citation

The Marine Corps has approved Magpul Industries Corp.'s signature polymer ammunition magazine for use in combat and training, according to a Magpul press release. 

Magpul is a private company that manufactures weapon accessories and tactical apparel to include ammunition magazines, buttstocks, weapon sights, slings and grips.

"The Magpul GenM3 PMag was the only magazine to perform to acceptable levels across all combinations of Marine Corps 5.56mm rifles and ammunition during testing.  That magazine has, therefore, been approved for use for both training and combat," Marine Corps Systems Command (MARCORSYSCOM) told Military Times. 

Based out of Austin, Texas, Magpul’s polymer-based magazine, commonly referred to as the PMAG, has become a favorite of combat veterans and members of the special operations community since its inception in 2007. 

Its rugged dependability has made it a top performer among private competitors in the small-arms accessory sector. 

“ The PMAG is a great product … lightweight and durable. I have seen numerous special ops teams from all services pass through here, and they all use PMAGs. Also, a large amount of Marine infantry here use PMAGS, including their Force Recon elements,” said an Army infantryman deployed to Afghanistan. 

 

However, the increasing use of polymer magazines in combat theaters for deployed U.S. troops has not been without controversy. In 2012, both the Marine Corps and U.S. Army banned the use of any non-standard magazine, allowing only the government issued aluminum magazines for combat and training. 

"The specification to use "only tested, approved, and authorized magazines" was born from the Combat Marksmanship Symposium of 2012 where it was discussed that there were performance concerns with the many commercial magazines being observed during annual weapons qualifications.  Since the Army and Marine Corps are both working toward new ammunitions and/or magazines, but neither quite done, it was decided to simply reiterate that only those magazines tested by the Primary Inventory Control Activity (PICA) would be allowed until further notice," MARCORSYSCOM told Military Times.  

The polymer magazine ban was a two-fold issue stemming from untested polymer magazines appearing in the hands of Marines deployed in combat zones that were from unknown or less reliable manufacturers; and the lack of reliable testing to determine which manufacturers were producing satisfactory equipment— the safest solution was then to impose a ban, according to Duane Liptak, the Director of Product Management and Marketing at Magpul. 

In response to the Marine Corps ban on unapproved magazines in MARADMIN 668/12, Magpul issued a press release. 

“There is indeed an issue with respect to Infantry Automatic Rifle (IAR) compatibility with the first generation, and MREV, or GEN M2 PMAG, due to the IAR having an SA-80/HK416 specification magazine well as opposed to the standard, Colt-specification magazine well of other U.S. service arms. While we certainly wish the IAR was specified with a standard magazine well, it has been fielded as submitted, and this incompatibility now presents a safety and survivability issue for those Marines deployed in combat,” Magpul clarified. 

“Our current generation PMAG, the GEN M3, is fully compatible with the IAR, the M4, the M16A4, and all other 5.56 platforms in the current US inventory,” Magpul further explained. 

Since the ban, excessive testing has been performed on the PMAG GEN M3, as well as other commercial magazines, at various government facilities; and the Magpul GEN M3 PMAG has been modified from a previous version to fit into the magazine well of the M27, according to a representative at MARCORSYSCOM. 

The M27, also known as the IAR, has recently undergone testing this fall with the Marines’ experimental 3rd Battalion, 5th Marines, based out of California, as a potential replacement to the standard-issue M4 carbine.  

“Throughout this testing, the GEN M3 PMAG has had zero magazine-related stoppages through all of the tests combined, with any ammunition tested, in M4, M16, and M27 platforms, and has performed better than any other magazine tested, with all of these weapon types," Duane said in an interview with Military Times. 

"The GEN M3 PMAG also performs well with the M249 SAW when belted ammunition is not available.  As a side benefit, the GEN M3 PMAG also reduces damage to chamber face and feed ramps when using M855A1 ammunition, extending weapon life,” he said. 

The new GEN M3 PMAGs will be manufactured out of Magpul’s shipping and manufacturing center based out of Cheyenne, Wyoming. The old standard issued aluminum magazines are expected to be used for training purposes until their life cycle ends. 

 

 

 

 

  • Upvote (+1) 4
Lien vers le commentaire
Partager sur d’autres sites

  • 2 weeks later...
  • 4 weeks later...

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
  • Statistiques des membres

    6 003
    Total des membres
    1 749
    Maximum en ligne
    pandateau
    Membre le plus récent
    pandateau
    Inscription
  • Statistiques des forums

    21,6k
    Total des sujets
    1,7m
    Total des messages
  • Statistiques des blogs

    4
    Total des blogs
    3
    Total des billets
×
×
  • Créer...